How to use the SOTA 'Silver Pulser' to purify blood - Simple Instructions
How to use the
To Purifiy the
FOR RESEARCH PURPOSES ONLY. NOT INTENDED TO TREAT OR CURE
I am a researcher of alternative medicine and not a medical professional. Due to
U.S. FDA regulations and various State laws, I cannot make any medical claims
for experimenting with electro-therapies. All information on this website
referring to healing treatment therapies must be considered theoretical and
unproven and for experimental research only.
Disclaimer: I, Shirley Emmons,
the sole author of
Take full responsibility for anything written about the
SOTA instruments on this website, which is my sole opinion;
Want it to be known that the manufacturer of the SOTA
instruments has not written or endorsed any of the information on this site
about cancer or any other modality including any protocols that have been
written for use with the SOTA Silver Pulser, Magnetic Pulser or Water Ozonator
Want it to be known that (a) The manufacturers of the SOTA
instruments sell electronic test equipment and do not make any medical claims
for their devices and (b) I have not been granted license, permission or
authority by the manufacturer of the SOTA instruments to make any medical claims
for that company.
is the SOTA Silver pulser and What Does it Do?
Do I Use the Silver pulser to Cleanse the Blood?
IMPORTANT - Read all information here before using the
What is the SOTA Silver pulser and What Does
Most health problems arise when . . .
blood becomes so “dirty” that it cannot effectively deliver enough oxygen and
nutrients to the body’s cells for them to be able to produce sufficient energy
to accomplish their tasks. In addition, the immune system becomes overwhelmed
and unable to keep up with its ongoing housekeeping tasks, such as destroying
and cleaning out microbes, toxins and cancer cells.
As part of the Beck Protocol, the
Silver pulser is used to
purify the blood - Purifying the blood, by getting rid of toxins and unwanted microbes,
clears the way for oxygen/nutrient delivery, and improves cellular energy
production. Most importantly, immune
system function is restored, enabling it to more effectively “sweep out”
toxins, cancer cells and any new invading pathogens.
In the Beck
Protocol, the Silver pulser is used
with the Magnetic pulser
to cleanse lymph and organs, and drinking both ionic colloidal silver to
assist the immune system and ozonated
water (or copious amounts of regular water with an alternative oxidative
invokes a minute current of 50-100 microamps in
the blood, via the pulses at the wrist, which is shown to destroy all bacteria,
fungi and viruses in the blood
This level of current is
typical of currents naturally occurring in your body -
and is 1000 times less than that used in
the FDA-approved TENS units.
The process is
i.e. your blood stays in your body, and the treatment is harmless to healthy
How do I use the Silver pulser to Cleanse the
∞ GENERAL OR EMERGENCY USE?
Use the blood purifier for
2 hours daily
(Can split this into smaller sessions) for at least
3 weeks -
If the cleansing reactions (see below) have stopped and you are feeling
well and energetic, you're done. Otherwise you will need to continue treatment.
It may take 2 – 3 months for serious health problems.
For Sudden Problems -
Food Poisoning, Poisonous Bites
(Snake, Spider, Rabid Animal, etc),
Silver pulser for several
hours continuously, according to the severity of situation -
people have tested the continuous use of
the blood purifier, and demonstrated no long term adverse effects, other than
greater detoxification symptoms.
∞ PREPARATION FOR USE
Prepare and label a
sea-salt-in-water solution for electrode wetting -
solution provides the conductive interface between the cotton-covered electrodes
and the skin. Add 1/8 teaspoon of sea salt (not table salt) to 2 oz.
water (a dropper bottle is convenient). Greater salt concentration can cause
cosmetic skin burns, irritation and rash.
Add 4 drops of colloidal silver
solution if you have some.
If you don’t have any sea salt, or
if saline solution produces a rash during treatment, just use plain water.
Optionally, for best
electrical conductance, clean skin at contact area -
Scrub skin on inside wrists with an alcohol
swab or soap and water to eliminate skin oils, grime, dead skin cells, etc.
Rinse and dry thoroughly.
Mark Contact Points on
Skin at Pulse locations -
to illustrations in SOTA’s Silver pulser
carefully feel for radial and ulnal pulses and trace a line about 1 inch
long at each wrist site precisely on top and in line (parallel) with located
blood paths (Pulses on ulnar location opposite thumb are
harder to feel).
DRINK 8oz. of WATER
at the beginning and end of treatment to aid in detoxification
Dampen cotton electrode
sleeves with saline solution
(or plain water) –
remove excess solution by squeezing them inside a paper towel or
towel, then insert each electrode inside the middle of a cotton sleeve to
completely cover the metal.
If necessary later, keep electrode
sleeves damp by re-moistening.
NEVER let bare metal electrode touch skin
directly, or it will burn.
Alternatives to using
ready-made cotton sleeves –
may be necessary “in a
Wind a piece of
damp paper towel around the electrode –
make sure you fold a piece of
the edge over the tip to cover it.
a small piece of absorbent cotton material around the electrode
and then secure in place by winding cotton thread around the fabric –
make sure you
an edge over the tip to
Position and secure both
dampened, cotton-covered electrodes on the same wrist precisely over traced
trailing up the forearm).
place electrodes over new lesions, cuts, abrasions, or sunburn.
Secure electrodes snugly
in place using 1" wide stretch elastic band with Velcro -
With the electrode positions on thumb
(radial) side, and the second on the other inside (ulnar) of the
same wrist, the current
is confined to the blood in the lower forearm. Very little electrification is
detectable elsewhere thus making it safer for those with a heart-pacer).
and green LED's flash alternately with
electrodes unplugged when it is working properly.
NOTE: SOTA is now
offering cotton sleeves with velcro on one side, which some may find preferable
for positioning and holding the sleeves in place.
Activating the SILVER PULSER ∞
Plug in electrode wires to
Silver pulser, mount unit on large Velcro stretch-band holder, and attach band
comfortably to upper arm. Turn on unit by rotating dial clockwise, and advance
slowly to comfortable level -
is small, convenient, unobtrusive, and uses one 9V battery. It does not
interfere with normal activities.
Muscle twitching in palm and fingers
is normal and experienced occasionally.
Re-adjust power occasionally to maximum comfort level -
It is usual that you become accustomed to the current after a while and need to
turn it higher.
Keep the skin between the electrodes dry –
this prevents a short-circuit across the wrist. Wipe
the area intermittently with a tissue or paper towel to keep it dry.
to turn off unit when the treatment session is over
∞ FOR THOSE WITH SENSITIVE
rash or irritation can sometimes occur in those with sensitive skin –
following tactics help to prevent irritation:
Alternate wrist on
lotion after use –
E.g. MSM cream, aloe vera gel
∞ SOTA YOUTUBE VIDEO
Visual instructions on how to use
SOTA’s Silver Pulser
Discomfort can occur if you detoxify
too rapidly ∞
Detoxification reactions are called the
Herxheimer's syndrome - symptoms can include
fatigue, headache, rashes,
fever, irritability, nausea, restlessness, insomnia, dizziness, flu-like
symptoms, dulled speech and more copious bowel movements. The
immune system attacking and removing disabled viruses and bacteria causes these
cleansing reactions. The individual needs to determine their own treatment pace,
and may have to reduce treatment times, according to how they feel afterward.
the cleansing reactions, the following are highly recommended:
water intake – Aim for an 8oz. Glass / Waking
2 - 3 glasses ozonated water / day (if available)
a daily 30 minute 3% hydrogen peroxide foot bath.
Move your lymph:
Rebound, Exercise, Walk
∞ DURING Blood
Substances in the blood are more easily absorbed into cells
Some substances may become
toxic at a magnified level
Minimize daily herbal, vitamin and mineral supplements taking them about 15
minutes or so after treatment -
~22 hours for them to leave your blood by the next treatment time.
If possible, discontinue
all drugs, alcohol, tobacco, pharmaceuticals and laxatives -
for at least 2 days before starting, and for the duration of blood
Go easy on the garlic –
it contains an ingredient, which can be harmful if its levels are intensified.
If you feel you must take
“mild” pharmaceuticals (NOT potent drugs. E.g. chemotherapy) -
then take them 15 minutes or so after treatment.
Copper or silver electrodes may become tarnished
after extensive use –
simply use a “green scrubbie” to gently and easily remove this oxidative
build-up, which intereferes with current flow. Note that newer electrodes have a
rubber coating, which alleviates this issue.
Soak electrode sleeves periodically in a solution
of 3% hydrogen peroxide to sterilize them.
Output Signal Information -
Copper Stimulator Probes:
31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at
(cycles per second)
+/- 1 Hz. Note
the extremely square and symmetrical waveform; free of any spikes or
Copper Stimulator Probes:
~12 milliamps maximum when probes shorted and Control Knob
on full intensity. This level of externally applied current is necessary
to create a
current of around 50-100 micro-amps in
Uses 9V Alkaline Battery
heavy duty battery)
One battery will last about 3 weeks. If you
are planning extensive use of the Silver pulser,
it would be more economical to buy and
use a rechargeable 9V battery and battery recharger. Be aware that some
9V batteries are fatter than others – to ensure it fits, take the SOTA pulser to
the store and try it in for size.