Introduction to the best available HIGH RF FREQUENCY GENERATOR
"HIGH RF FREQUENCY GENERATOR" using
PLASMA TUBE AMPLIFIER
"HIGH RF FREQUENCY
GENERATOR" (20MHz Sweep/Function Generator with a 3.1 MHz carrier frequency)
To protect its manufacturer and distributors, the generator
is not named or linked to on this site, but without prejudice, a couple of website
addresses are provided for you to look it up yourself (Please
copy/paste address into web browser)
The "HIGH RF FREQUENCY GENERATOR"
for research use can be viewed and purchased at the following websites:
www.newhopetechnologies.com
www.futurefrequency.com
The "HIGH RF FREQUENCY GENERATOR"
together with an amplifier is the most authentic, available replica of a
Rife Machine (but now using high-tech circuitry).
Well-known microbiologist, Dr. Royal Rife designed and built his machines in the
1930s for the purpose of killing microbes (inside and outside of body's cells) by
exposing them to their inherent resonance frequency. At great expense of time and
money, the "HIGH RF FREQUENCY GENERATOR" manufacturer
even managed to find original "Rife Machines," which were sold and delivered before
Rife's research facility was closed down by the FDA. Other "Rife Machine" contenders
seen on the internet are unable to come close to reproducing Rife's specifications
for frequency ranges, power, and the ability to output concurrent multiple frequencies,and
more.
Rife Videos
Electrotherapies utilizing the
"HIGH RF FREQUENCY GENERATOR" are very gentle.
Barely felt by the user, if felt at all.
"HIGH RF FREQUENCY
GENERATOR" specifications. This instrument is the most powerful and versatile frequency
generator available:
Can operate in two different frequency
modes. Latest model has frequency resolution to an accuracy of 2 decimal
places.
(1) RF MODE (higher
frequency mode).
Frequency output range of 0.1 Hz - 20 MHz; Voltage 0 - 110V; Power:
4.7 Watts
RF carrier frequency of 3.1 MHz.
Now mathematically found to be the ideal carrier frequency for many
purposes, including powerful sweeps through user-defined frequency ranges. Radio
stations use a carrier frequency to carry or "piggyback" (technically
referred to as modulate) the audio frequencies, voice or music that you hear on
your radio.
Can modulate any frequency
from 1 Hz up to 1 Mhz Produces up to 100 sideband
frequencies. Additionally, the "HIGH RF FREQUENCY GENERATOR" optimizes
the delivery of historically therapeutic sideband frequencies
when using square wave audio frequencies.Carrier wave can also be
turned off for use as a standard low audio frequency generator. Able to run 2 single frequencies
from 40,000 Hz up to 20 MHz modulated ("piggybacked")
on a specific carrier frequency;
(2) AUDIO MODE (lower frequency
mode).
Audio frequency range on latest model increased from 1-40,000
Hz to 1-400,000 Hz. Voltage: 0-36 V. Power: ~0.75 watts
Digitally accurate
(crystal controlled) frequencies
converted to analog. Provides full analog harmonics
Runs both sine wave and square wave
waveforms. The latter producing therapeutic square wave harmonics;
"HIGH RF FREQUENCY GENERATOR" is the only generator available
to run up to 8 frequencies (each up to 40,000 hertz)
simultaneously. Significantly reducing
treatment time;
Enough memory to program up to 2000 auto channels.
Each holding 48 frequencies each.
Gating feature. Squarewave frequencies
naturally pulse but when gating is used with a square wave frequency it creates
a second pulse which creates what some call a "pulsating squarewave." When
used with sinewave or squarewave frequencies gating pulses the frequency on and
off at the pre-determined gate rate set by the user. 1-5000 Hz.
Duty cycle 10 -100%. Allows control over
percentage of cycle that signal is on.
Sweep and convergence sweep feature. You
specify a frequency range --- A sweep runs ,
one frequency at a time, from your beginning frequency to your ending frequency. A
convergence sweep runs one frequency at a time
from your beginning frequency to your ending frequency, whilst concurrently running
your ending frequency to your beginning frequency.
Additionally, you can sweep when running any of the 2000 programmable auto channels
(covers a variable range from 2 Hz to 20,000 Hz). By way of example, if you are
running a frequency of 2000 Hertz and you want to sweep 1000 Hz then the sweep will
start at 1500 Hz (Running frequency less half sweep range) Hz and will end at 2500
(Running frequency plus half sweep range) Hz.
Output frequencies of the "HIGH RF FREQUENCY
GENERATOR" need to be amplified
The "HIGH RF FREQUENCY GENERATOR"
creates the frequencies, but for therapeutic
purposes, they need to be amplifed.
"PLASMA TUBE AMPLIFIER"
Drives the frequencies from the "HIGH RF FREQUENCY GENERATOR"
at amplified power through a plasma tube
The 195 Watt "PLASMA AMPLIFIER" directly outputs
to a connected, lighted plasma (argon and/or helium)
gas tube , which broadasts frequencies generated
by the "HIGH RF FREQUENCY GENERATOR" (+ therapeutic
sideband harmonic frequencies) (i.e. it has no direct body contact can penetrate all body cells reaching microbes anywhere in the body A n
indirect contact device requires a much higher power than a direct contact device
to be able to deliver it's output at the higher frequencies required.
For legal reasons, the plasma tube
must be purchased from a manufacturer who is NOT selling the "HIGH RF FREQUENCY
GENERATOR" and amplifiers
Can be used (as an experimental device)
against ANY type of cancer.
Non-contact/broadcast type amplifier is especially
preferred against bone cancer, bone marrow cancer or brain cancer. This
is because electrical currents in a contact type amplifier will follow the "path of least resistance" and may travel
through denser bone structures, skirting around problem areas, such as the brain,
bone marrow,and less dense bone (Bone density varies with the type of bone)
The "PLASMA AMPLIFIER" broadcasts a
variable 2.1 to 3.6 MHz carrier frequency (using a sine wave
oscillator). This can be set and then fine-tuned using a frequency counter
(usually provided with the "PLASMA AMPLIFIER") to measure the output
from the plasma gas tube. Connected to the "HIGH RF FREQUENCY
GENERATOR" , the "PLASMA AMPLIFIER" can amplify audio frequencies
(up to 400,000 Hz) from the "HIGH RF FREQUENCY GENERATOR"
and output them through the plasma tube (The "PLASMA AMPLIFIER"
RF output frequency becomes the carrier frequency for the audio frequency).
Potential interference with AM radio tower within ½
mile from where equipment is located. The "PLASMA
AMPLIFIER" can broadcast for about 1/3 of a mile, it can potentially
interfere with any local A.M. radio station tower within this range. As an example,
a radio station broadcasting at 1190 A.M. has a broadcast frequency of 1,190,000
hertz (cycles /second).
Greatest power absorption range is 1 inch to 2 feet when
using plasma tub
"HIGH RF
FREQUENCY GENERATOR" and PLASMA amplifierExample prices as of April 2024
"HIGH RF FREQUENCY GENERATOR"
with "PLASMA AMPLIFIER" (190 watt)
$4470 (incl. shipping)
www.newhopetechnologies.com or
www.futurefrequency.com
(Please copy/paste address into web browser)
+ Plasma Tube $375 + shipping (sold separately by another
company)
(using "HIGH RF FREQUENCY GENERATOR" as an experimental
/ research device)
RIFE RESONANCE PROTOCOL for CANCER using the "HIGH RF
FREQUENCY GENERATOR" + "PLASMA AMPLIFIER"
