"HIGH RF FREQUENCY GENERATOR" with either PLASMA TUBE or 15 WATT LINEAR AMPLIFIER

Introduction to the best available "HIGH RF FREQUENCY GENERATOR"

(20MHz Sweep/Function Generator with a 3.1 MHz carrier frequency)

To protect its manufacturer and distributors, the generator is not named or linked to on this site, but without prejudice, a couple of website addresses are provided for you to look it up yourself   (Please copy/paste address into web browser)

The "HIGH RF FREQUENCY GENERATOR" for research use can be viewed and purchased at the following websites:

www.newhopetechnologies.com      www.futurefrequency.com       or other distributors

The "HIGH RF FREQUENCY GENERATOR" together with an amplifier is the most authentic, available replica of a Rife Machine (but now using high-tech circuitry).   Well-known microbiologist, Dr. Royal Rife designed and built his machines in the 1930s for the purpose of killing microbes (inside and outside of body's cells) by exposing them to their inherent resonance frequency. At great expense of time and money, the "HIGH RF FREQUENCY GENERATOR" manufacturer even managed to find original "Rife Machines," which were sold and delivered before Rife's research facility was closed down by the FDA. Other “Rife Machine”contenders seen on the internet are unable to come close to reproducing Rife's specifications for frequency ranges, power, and the ability to output concurrent multiple frequencies,and more.

Rife Videos

Electrotherapies utilizing the "HIGH RF FREQUENCY GENERATOR" are very gentle.     Barely felt by the user, if felt at all.

"HIGH RF FREQUENCY GENERATOR" specifications.  

This instrument is the most powerful and versatile frequency generator available:

Can operate in two different frequency modes. Latest model has frequency resolution to an accuracy of 2 decimal places.

(1) RF MODE  (higher frequency mode).    Frequency output range of 0.1 Hz - 20 MHz;  Voltage 0 - 110V; Power: 4.7 Watts (can be increased to 15 Watts in RF mode by using  “15 WATT LINEAR AMPLIFIER”(see below), making the "HIGH RF FREQUENCY GENERATOR" up to 75 times more powerful than most standard generators on the market);

RF carrier frequency of 3.1 MHz.   Now mathematically found to be the ideal carrier frequency for many purposes, including powerful sweeps through user-defined frequency ranges. Radio stations use a carrier frequency to carry or ”piggyback” (technically referred to as modulate) the audio frequencies, voice or music that you hear on your radio.

• Can modulate any frequency from 1 Hz up to 1 Mhz

• Produces up to 100 sideband frequencies.   Additionally, the "HIGH RF FREQUENCY GENERATOR" optimizes the delivery of historically therapeutic sideband frequencies when using square wave audio frequencies.

• Carrier wave can also be turned off for use as a standard low audio frequency generator.

• Able to run 2 single frequencies from 40,000 Hz up to 20 MHz  modulated (“piggybacked”) on a specific carrier frequency;

(2) AUDIO MODE (lower frequency mode).   Audio frequency range on latest model increased from 1-40,000 Hz to  1-400,000 Hz. Voltage: 0-36 V. Power: ~0.75 watts

Digitally accurate (crystal controlled) frequencies converted to analog.    Provides full analog harmonics

Runs both sine wave and square wave waveforms.   The latter producing therapeutic square wave harmonics;

"HIGH RF FREQUENCY GENERATOR" is the only generator available to run up to 8 frequencies (each up to 40,000 hertz) simultaneously.    Significantly reducing treatment time;

Enough memory to program up to 2000 auto channels.    Each holding 48 frequencies each.

Gating feature.    Squarewave frequencies naturally pulse but when gating is used with a square wave frequency it creates a second pulse which creates what some call a "pulsating squarewave."  When used with sinewave or squarewave frequencies gating pulses the frequency on and off at the pre-determined gate rate set by the user. 1-5000 Hz.

Duty cycle 10 -100%.  Allows control over percentage of cycle that signal is on.

Sweep and convergence sweep feature.  You specify a frequency range --- A sweep runs , one frequency at a time, from your beginning frequency to your ending frequency. A convergence sweep runs one frequency at a time from your beginning frequency to your ending frequency, whilst concurrently running your ending frequency to your beginning frequency.

Additionally, you can sweep when running any of the 2000 programmable auto channels (covers a variable range from 2 Hz to 20,000 Hz). By way of example, if you are running a frequency of 2000 Hertz and you want to sweep 1000 Hz then the sweep will start at 1500 Hz (Running frequency less half sweep range) Hz and will end at 2500 (Running frequency plus half sweep range) Hz. 

Output frequencies of the "HIGH RF FREQUENCY GENERATOR" need to be amplified

The "HIGH RF FREQUENCY GENERATOR" creates the frequencies, but for therapeutic purposes, they need to be amplifed.   

You need to choose ONE of the two amplifiers available:

(1) “PLASMA TUBE AMPLIFIER”

Drives the frequencies from the "HIGH RF FREQUENCY GENERATOR" at amplified power through a plasma tube

The 20 - 190 Watt "PLASMA AMPLIFIER"  directly outputs  to a connected, lighted plasma (argon and/or helium)  gas tube , which broadasts frequencies generated by the "HIGH RF FREQUENCY GENERATOR" (+ therapeutic sideband harmonic frequencies)  (i.e. it has no direct body contact).  This can penetrate all body cells and fluids, thus reaching microbes anywhere in the body. This is the method used by Rife machines in clinics in the 1930s/1950s. Also like these machines, the “PLASMA AMPLIFIER” utilizes high voltage (1,350 V) / low current (30 - 140 mA). An indirect contact device requires a much higher power than a direct contact device to be able to deliver it's output at the higher frequencies required.

For legal reasons, the plasma tube must be purchased from a manufacturer who is NOT selling the "HIGH RF FREQUENCY GENERATOR" and amplifiers

Can be used (as an experimental device) against ANY type of cancer.   Non-contact/broadcast type amplifier is especially preferred against bone cancer, bone marrow cancer or brain cancer.   This is because electrical currents in a contact type amplifier (E.g. “15 WATT LINEAR AMPLIFIER”) will follow the "path of least resistance" and may travel through denser bone structures, skirting around problem areas, such as the brain, bone marrow,and less dense bone (Bone density varies with the type of bone)

The “PLASMA AMPLIFIER” broadcasts a variable 2.1 to 3.6 MHz carrier frequency (using a sine wave oscillator).   This can be set and then fine-tuned using a frequency counter (usually provided with the “PLASMA AMPLIFIER”) to measure the output from the plasma gas tube. Connected to the "HIGH RF FREQUENCY GENERATOR" , the “PLASMA AMPLIFIER”can amplify audio frequencies (up to 400,000 Hz) from the "HIGH RF FREQUENCY GENERATOR" and output them through the plasma tube (The “PLASMA AMPLIFIER” RF output frequency becomes the carrier frequency for the audio frequency).

Potential interference with AM radio tower within ½ mile from where equipment is located.    The “PLASMA AMPLIFIER” can broadcast for about 1/3 of a mile, it can potentially interfere with any local A.M. radio station tower within this range. As an example, a radio station broadcasting at 1190 A.M. has a broadcast frequency of 1,190,000 hertz (cycles /second).

Greatest power absorption range is 1 inch to 2 feet when using plasma tube. Can reach 40 feet.  Built-in reflector concentrates EM field 180 degrees in front of plasma tube.

(2) “15 WATT LINEAR AMPLIFIER”

Not as powerful or as versatile as the “PLASMA AMPLIFIER”, but still an excellent instrument for those needing a less expensive alternative

The "15 WATT LINEAR AMPLIFIER" connected to the "HIGH RF FREQUENCY GENERATOR" operating only in RF mode boosts the power output to 15 watts.  This is up to 75 times more power than other frequency generators not using a carrier frequency.

The “15 WATT LINEAR AMPLIFIER” is a contact electrode system.    Two hand-held stainless steel cylinders and two flat stainless steel foot pads (electrodes) are directly wired into the “15 WATT LINEAR AMPLIFIER”, effectively carrying the radio frequencies from the amplifier to the body. In use, the hand-held cylinders and foot pad electrodes are covered with custom-fitted damp terrycloth sleeves for optimal electrical conductance.

Since the “15 WATT LINEAR AMPLIFIER” provides frequencies via electrical currents in contact with the body, it may skirt around some problem areas.   This because an electric current will follow the "path of least resistance", traveling best through dense bone.

You can upgrade a “15 WATT LINEAR AMPLIFIER” to a “PLASMA AMPLIFIER”.   The "HIGH RF FREQUENCY GENERATOR" must be shipped back to the manufacturer for a slight engineering modication. This is also the case if you want to swap a “PLASMA AMPLIFIER” for a “15 WATT LINEAR AMPLIFIER”.

Cost / Vendors of "HIGH RF FREQUENCY GENERATOR" and amplifiers

Prices as of April 2019 (www.newhopetechnologies.com)

"HIGH RF FREQUENCY GENERATOR" with ”PLASMA AMPLIFIER” (190 watt)

$4220 (incl. shipping)

+ Plasma Tube $335 + shipping (sold separately by another company)

"HIGH RF FREQUENCY GENERATOR" with ”15 WATT LINEAR AMPLIFIER”

$2320 (incl. shipping)

www.newhopetechnologies.com         www.futurefrequency.com

(Please copy/paste address into web browser)

RIFE RESONANCE PROTOCOL for Cancer

(using "HIGH RF FREQUENCY GENERATOR" as an experimental / research device)

RIFE RESONANCE PROTOCOL for CANCER using the "HIGH RF FREQUENCY GENERATOR" + Amplifier